The Yellow Farmhouse Garden

Boy. am I tired!!

I pruned all the grapes…it took all day. Notice that these are on a decorative arbor, not a standard arbor. The arbor is about 8 feet high and 99% of the vines are growing on top. So I have to climb on top of the arbor and stand on those 2 by’s, then bend down and prune.

I’m not complaining, mine you, I enjoy pruning grapes. I just wanted to give you feel for a day in the life of a gardener.

You saw the “before photo” a couple of posts ago. Here it is in progress:

Here it is at the end of the day today:

This arbor is about 100 feet long.

You can’t see it in this photo, but I left the lower vines on the main trunk this year because I want to encourage them to grow like a conventional two wire system below. These are very vigorous Concord grapes and should be able to cover the entire arbor. I had this set up until two years ago, when I removed the lower wires thinking it would look more “artistic”. I like it better the original way with the wires.

Tomorrow I will be back in the greenhouse to transplant seedlings if it is rainy. Otherwise, I’m outside cleaning up the vegetable beds.

Speaking of beds, I think I’m going to bed early tonight.

Bob

I got a good start on those grape vines this afternoon and hope to spend most of the day tomorrow ( Tuesday) working on them.

My tool of choice for this job (and other pruning work) is the Felco#2:

I use the Felco on grapes because of the range of diameter of the vines that need to be cut. They typically range from pencil thickness to the diameter of your thumb (or even someone else’s thumb). It would be over-kill to use them on light pruning such as cutting perennials or flower stems.

This is an exceptional pruner made to very high standards. They are a bit pricey compared to the Chinese knock offs that are out there but are well worth the money. This tool should last you a lifetime. It even comes with a special wrench allowing you to replace the cutting blade if need be.

This model, the #2, is designed for people with medium to large hands. Felco makes models suited to folks with smaller hands as well.

The only problem I have with this tool is that it has a tendency to disappear. People like to “borrow” it without telling me, then never return it! One time I even had someone “swap” his old, abused Felco #2 (I think he liked to use it to cut fence wire) with mine, thinking I would never notice! Scheesh…

I used a Corona pruner for many years (and stiil have it). The Corona is a fine tool as well.

Bob

Those grow lights I wrote about in an earlier blog are used in our greenhouse mostly during the winter months to supplement natural sunlight. As the days grow longer we use them only to “brighten up” a dreary day this time of year.

These lights are of the High Intensity Discharge type and produce very intensive light. The model we use is a two bulb system. One bulb (Metal Halide) creates the blue spectrum of light and the other (High Pressure Sodium)the orange spectrum. Together, these bulbs come pretty close to mimicking the spectrum of natural sulight, which means good growing conditions for your plants…even those that require high-light conditions.

This type of fixture cannot be plugged directly into a wall outlet. It needs a Ballast to regulate the voltage for the lamp. It gets a little complicated from here how a Ballast works, with its transformer, capacitor and ignitor. Anyhow, the Ballast itself is then plugged directly into the household outlet.

The light these lamps provide is so bright that we can hang them 3-1/2′ to 4′ above our growing plants and still provide all the light they need.

Our fixtures came from Charlie’s Greenhouse Supply. Purchasing these are not for the faint of heart… cost of the dual fixture $619.00, the ballast…$495.00, the sunlight they provide..priceless.

Other types of growlights are available, cool temperature florescent fixtures can be used for starting and growing seedlings. This type has to be place just a few inches above the growing plants to provide enough light. The advantage is their cost…maybe 1/10th the price of our HID lights.

We will discuss this subject in more detail later, perhaps in the fall as our outdoor season ends and we move back inside. In the mean time let’s enjoy the spring.

Bob

All of the snow we’ve been having has chased us indoors. That’s OK though, our indoors is a greenhouse.

It was so dark and dreary today that I turned on the high intensity grow lights during the middle of the morning and kept them on all day. The light really helps to improve one’s general mood.

I found something in the south end of the greenhouse that you may “get a kick” out of…figs!

These are Kadota figs from Stark Brothers Nursery:

The fig trees were delivered last spring as small seedlings but grew very fast and produced fruit by the end of the summer. That first flush of fruit fell off and we didn’t get to pick any figs.

We let the trees get frosted in the fall then brought them in before the weather really got cold. They dropped their leaves, so I stopped watering for a while to let them go dormant. I started watering them again in early December, if I remember correctly.

Now that spring has arrived, they have begun setting fruit again. The fruit is already larger than it was last summer.

So between the grow lights and the figs, I can imagine I’m in the south of Italy while I’m working!

Bob